Shandong, CN · 00:00 GMT+8
Engineered in China · Delivered to 20+ markets
Field notes / 2026 edition Written by the SDKM engineering desk

Read the steel before you buy it.

Practical notes on standards, cost drivers, BIM, compliance and export logistics — written for the people who have to compare a steel package and defend the decision.

24Field notes
5Min average read
0Sales brochures
Procurement / Engineering / Logistics
Prefabricated vs Site-Built Steel: A Like-for-Like Cost Comparison

Prefabricated vs Site-Built Steel: A Like-for-Like Cost Comparison

Prefabrication can reduce site labour and schedule, but it is not automatically cheaper. Compare the same finished building and the same boundaries.

Read the field note
Shipping a Prefabricated Steel Building: From Bundle Marks to Port
Warehouse & Logistics Nov 2026 5 min read

Shipping a Prefabricated Steel Building: From Bundle Marks to Port

A steel building ships as a set of labelled components, not as a finished structure. Transport planning starts on the drawing board.

Where Cold-Store Energy Really Goes — and How the Envelope Controls It
Cold Storage Nov 2026 5 min read

Where Cold-Store Energy Really Goes — and How the Envelope Controls It

Thick panels are not an energy strategy on their own. Air leakage, thermal bridges, doors and controls decide the real load.

Chilled, Frozen or Deep-Frozen: Matching Temperature Bands to the Building
Cold Storage Nov 2026 5 min read

Chilled, Frozen or Deep-Frozen: Matching Temperature Bands to the Building

The setpoint is only one number. Product load, door traffic, floor conditions and refrigeration capacity decide whether the room holds it.

Vapour Barriers in Cold Stores: Where They Belong and Why
Cold Storage Nov 2026 5 min read

Vapour Barriers in Cold Stores: Where They Belong and Why

A vapour barrier is not an accessory. Its position, continuity and joints decide whether the insulation stays dry and the steel stays…

Cold Store Cost per Square Metre: What the Number Actually Covers
Cold Storage Nov 2026 6 min read

Cold Store Cost per Square Metre: What the Number Actually Covers

A cold-store rate can look low until you see what it excludes. Here is how to compare steel, panels, floors, refrigeration and…

Humidity Control in Livestock Steel Buildings
Agricultural Nov 2026 5 min read

Humidity Control in Livestock Steel Buildings

Humidity is a ventilation and envelope problem. Reducing moisture at source is cheaper than trying to dry the air after it rises.

Livestock Steel Buildings: A Practical Service-Life Guide
Agricultural Nov 2026 5 min read

Livestock Steel Buildings: A Practical Service-Life Guide

Thirty to fifty years is achievable, but ammonia, moisture and washdown decide which parts of the building fail first.

A Realistic Steel Bridge Maintenance Budget
Bridge Engineering Nov 2026 5 min read

A Realistic Steel Bridge Maintenance Budget

Separate routine inspection and cleaning from occasional repainting and structural repair. A single annual average hides the peaks.

Steel Bridge Service Life: Design, Coating and Inspection Economics
Bridge Engineering Nov 2026 5 min read

Steel Bridge Service Life: Design, Coating and Inspection Economics

A 75- to 100-year steel bridge is not achieved by steel alone. Drainage, coating maintenance and fatigue detailing decide the real service…

Can a Steel Bridge Be Prefabricated? What Ships and What Is Assembled On Site
Bridge Engineering Nov 2026 5 min read

Can a Steel Bridge Be Prefabricated? What Ships and What Is Assembled On Site

Prefabrication moves work away from the crossing, but it does not deliver a finished bridge in one piece. The split follows transport…

Service Life of Commercial Steel Structures: What 50 Years Really Means
Commercial & Industrial Nov 2026 5 min read

Service Life of Commercial Steel Structures: What 50 Years Really Means

Fifty years is a planning expectation, not a warranty. Coatings, drainage, use and maintenance decide whether the building reaches it.

Commercial Steel Buildings and Insurance: What Owners Should Declare
Commercial & Industrial Nov 2026 4 min read

Commercial Steel Buildings and Insurance: What Owners Should Declare

A steel building usually fits a standard commercial property policy, but construction method, fire protection and occupancy still need to be declared…

How SDKM Delivers a Cold-Store Steel Package
Cold Storage Nov 2026 5 min read

How SDKM Delivers a Cold-Store Steel Package

From the first temperature brief to bundle marks, a cold-store steel package is coordinated with the envelope, floor and refrigeration interfaces.

Cold-Store Insulation Requirements Beyond Panel Thickness
Cold Storage Nov 2026 5 min read

Cold-Store Insulation Requirements Beyond Panel Thickness

Continuous enclosure, controlled vapour movement and protected joints matter as much as the declared insulation value.

How Thick Should Cold-Store Insulation Be?
Cold Storage Nov 2026 5 min read

How Thick Should Cold-Store Insulation Be?

Thickness ranges are a starting point. The final build-up should follow a heat-gain calculation and a continuous, buildable assembly.

Steel Cold Stores at −30°C: Steel Grade, Thermal Breaks and Floor Design
Cold Storage Nov 2026 5 min read

Steel Cold Stores at −30°C: Steel Grade, Thermal Breaks and Floor Design

Steel can support a −30°C room. The questions are fracture toughness, thermal bridging, airtightness and what happens under the floor.

Cold Storage Maintenance: The Envelope Comes Before the Frame
Cold Storage Nov 2026 5 min read

Cold Storage Maintenance: The Envelope Comes Before the Frame

Ice at a door or a wet panel joint usually appears long before corrosion on the frame. Inspect the envelope first, then…

How to Read a Multi-Storey Steel Project Portfolio
Multi-Storey Nov 2026 4 min read

How to Read a Multi-Storey Steel Project Portfolio

A project photo proves very little. Look for scope, storey count, completion stage and the documentation that shows what the fabricator actually…

Height Limits for Multi-Storey Steel Buildings: Code, Wind and Foundations
Multi-Storey Nov 2026 5 min read

Height Limits for Multi-Storey Steel Buildings: Code, Wind and Foundations

There is no universal storey cap. The real limits come from the local code, the lateral system and the ground beneath the…

Steel Buildings Above Five Storeys: What Changes Structurally
Multi-Storey Nov 2026 5 min read

Steel Buildings Above Five Storeys: What Changes Structurally

Steel can go well above five storeys. Wind, fire, foundations and floor loads are the real constraints, not the material.

BIM for Steel Buildings: When the Model Pays for Itself
Engineering & BIM Nov 2026 5 min read

BIM for Steel Buildings: When the Model Pays for Itself

BIM is not mandatory for every steel project. It earns its cost when coordination, geometry or procurement complexity is high.

Budgeting a Commercial Steel Structure: Scope First, Rate Second
Commercial & Industrial Nov 2026 5 min read

Budgeting a Commercial Steel Structure: Scope First, Rate Second

A rate per square metre or per tonne is only useful after the supply boundary, design assumptions and exclusions are agreed.

What Drives the Cost of a Commercial Steel Building
Commercial & Industrial Nov 2026 5 min read

What Drives the Cost of a Commercial Steel Building

Floor area is a convenient starting point, but geometry, loads, envelope and compliance are what actually move the number.

Ask the desk

Have a question that is not in the notes?

Send it to the engineering desk. Real questions from buyers get answered directly — and sometimes become the next field note.

Ask an engineer
Monthly field notes

One useful note
a month.

No product launches, no discount codes. Just the engineering and procurement notes we would want if we were buying steel.

SDKM certificate

Certificate